ST-600 Float Type Level Transmitter, Seojin Instech Vietnam, Bộ chuyển đổi đo Mức kiểu phao

ST-600 Float Type Level Transmitter

Type & Model Float Type Level Transmitter

Principle A circuit, in which the resistance and the reed s/w is serially connected in intervals of 1-2cm, is installed inside the pipe. When the float, equipped with the magnet, moves up and down the pipe by buoyancy, the reed s/w is cut short, and the total resistance value changes until the cutting is summed. The resistance value that had changed based on the level of the fluid is transformed into an electric current signal DC 4-20mA, and put out. This is the most general level control and instruction device. - Separately sold Control Unit

Range Max. 6m

Temperature •304/316SS/PTFE : -10℃∼100℃ •PVC : -10℃∼60℃

Pressure •SUS304/316 : Max. 10㎏/㎠ •PVC/PTFE : Max. 2㎏/㎠

Features •Low cost •Wide awareness and installation experience •Selection of the detection material regarding various substances to be measured •Remote control •Explosion proof type possible (Ex d ⅡB T5 or T4)

Output 4∼20mA DC

Power Supply 24V DC

Application •Water tanks installed in upper stories, Industrial water, Pure water, Sewage, Drinking water, Water reserves, Cooling water, •LPG, Chemicals, Fuel tank, Paint, Various strong acid and alkali fluid •Tanks for ships (Optional) •Others

Remark MAT'L : 304/316SS, PVC, PTFE

SPT/SPL Pressure Type Level Transmitter, công tắc mức kiểu áp suất, Seojin Instech Vietnam,

SPT/SPL Pressure Type Level Transmitter

Type & Model Pressure Type Level Transmitter

Principle The subtle voltage signal, generated by the diaphragm type piezoelectricity particle installed in the sensor, and the static head difference according to the change of the fluid level, sunken in the bottom of the measured substance, is transformed into an electric current signal of DC 4∼20mA to be put out. Installation is very easy, and it can be easily used in narrow and deep wells or river dams with diagrams within 1 inch in unfrozen conditions of the atmospheric pressure.

Range 0∼30m

Temperature -10℃∼80℃

Pressure AMB.

Features •Easy installation •Easy to install at tanks without high ceilings or depth •Easy maintenance and repair

Output 4∼20mA DC

Power Supply 24V DC

Application •Well, water ways, dam, reservoirs, etc. •Water purification plant •Others

Remark Mat'l : 304/316SS

SFP Pneumatic Type Level Switch, Công tắc mức kiểu khí nén, Seojin Instech Vietnam,

SFP Pneumatic Type Level Switch

Type & Model Pneumatic Type Level Switch

Principle A pipe (with its lower part opened) is cut in the length of the electric contact's location, and sealed with a sensor, and then installed; the level of the fluid rises, increasing the pressure in side the pipe, and this water pressure pushes up the expanded diaphragm in the lower sensor, operating the Micro S/W connected to the upper part, for output. It is mostly used for open type fluid tanks that do not have pressure. When a H/L electric contact is required, two sensors are used. The on-off operation static head difference is 20mm. This model also is a unique product of our company.

Range •Standard : None(on-site Pipe assembly type) •Optional : Provision of basic 1,000mm pipes (the installed length can be freely adjusted)

Temperature -20℃∼80℃

Pressure AMB.

Features •On-site detection location adjustment installation •Best for slurries or high viscosity fluids •Easy installation

Output •1 SPDT •Contact capacity : 10A 250V AC

Application •Waste water tank and processing plant •Sewage processing plant •Chris, Jam, Ketchup, Food and Beverage tank •Others

Remark Mat'l : 304SS, PVC

SFM Mini Magnetic Float type Level Switch, Seojin Instech Vietnam, công tắc mức kiểu phao nam châm Seojin Instech

SFM Mini Magnetic Float type Level Switch

Type & Model Mini Magnetic Float type Level Switch

Principle 리드스위치와 자석을 이용하여 동작하는 계기로서 액면의 변화로 플로트가 부력에 의하여 도달하면은 플로트내의 자석이 리드스위치를 동작시켜서 해당되는 접점이 출력되어 레벨을 조절할 수 있도록 동작

Range ㆍStandard : 150mm ㆍOption : 300mm

Temperature ㆍSFM-11/12/13/14 : -10℃∼120℃ ㆍSFM-16 : -10℃∼80℃

Pressure Max. 5㎏/㎠

Features ㆍ저렴한 가격 ㆍ간단한 설치 ㆍ소형화 ㆍ스텐렌스 구조 ㆍ2액 경계면 검출 가능 (SFM-16)

Output ㆍSFM-12 : 1SPDT ㆍSFM-11/13/14/16 : 1SPST ㆍ접점용량 : 0.5A 300V AC / 0.5A 300V DC

SF Liquid Flow Switch, Seojin Instech Vietnam, Công tắc Lưu lượng dòng chảy SeoJin Instech

SF Liquid Flow Switch

Model & Type Liquid Flow Switch

Principle 벨로우즈의 원리를 이용하여 동작하는 계기로서 파이프 속에서 일정량의 액체가 흐르게 되면 파이프 속으로 취입된 플로워 스위치의 패달이 밀리면서 벨로우즈가 수축됨과 동시에 마이크로스위치를 동작시켜서 출력접점을 내주는 동작

Range ㆍ기본형 ㆍPT 3/4" : 1" ㆍPT 1" : 3" ㆍ옵션형 : 6"

Temperature ㆍ기본형 : -10℃∼80℃ ㆍ옵션형 : -10℃∼100℃

Pressure ㆍMax. 10㎏/㎠

Features ㆍ견고한 기계구조와 안정된 동작 ㆍ관경크기에 따른 패달 선택 ㆍ방수형 구조 ㆍ폭 넓은 유량 범위

Output ㆍ1 SPDT ㆍ접점용량 : 10A 250 VAC

SH(SEC) Electrode Type Level Switch, Seojin Instech Vietnam, , Công tắc mức kiểu điện Cực SeoJin Instech

SH(SEC) Electrode Type Level Switch

Type & Model Electrode Type Level Switch

Principle A device that measures by using the conductivity principle of fluid. When the measured fluid contacts the electrode pole installed at each of the desired level, the electric contact signal required by the site is put out step by step, by the conductance of the electrode pole for the Earth and the respective electrode pole. Based on the measuring principle, this device cannot be used for fluids that are not conductive. - Separately sold Control Unit

Range •Standard : 2m •Optional : Within 5m

Temperature -10℃∼80℃

Pressure AMB.

Features •Applied to a wide range of fluids •Enable to organize 6 poles •Easy installation and operation •Two-wire type application •Control & lowest/highest extreme alarm

Output •Standard : 1∼4 poles •Optional : over 5 poles

Application •Water processing tank •Industrial water •water for storage and agriculture •Other tanks such as for pump control

Remark Material : 304/316SS (PE or PTFE Tubing)

SQ Quick Float Type Level Switch, Công tắc mức kiểu phao Seojin Instech, Seojin Instech Vietnam,

SQ Quick Float Type Level Switch

Type & Model Quick Float Type Level Switch

principle When the float becomes afloat by the change in the surface, the internal Balance Weight instantly moves to the other side, and because of the rapid change in the center of gravity, the Float turns upside down like a tumbler, and operates the micro switch or the mercury switch in order to show the electric contact and control the level. It is usually used for the level control of domestic or other waste water - Control unit (separately sold)

Range •Standard :5m •Optional: Within 20m

Temperature •SQM/H/C : -10℃∼70℃(plastic) •SQE : -10℃∼150℃(316SS)

Pressure •SQM/H/C : 2㎏/㎠(ABS plastic) •SQE : Max. 10㎏/㎠(316SS)

Features •Low cost •Easy installation •Applied to waste water and sewage •The electric contact location can be controlled on-site •Two-wire type possible.

Output •Standard : 1∼4 point •Optional : 5 point •Contact capacity : SQM : 0.4A 100V AC(Micro S/W) SQH : 3A 250V AC(mercury S/W) SQC/E : 1A 120V AC(Micro S/W)

Application •Excrement tank •Industrial waste water •Agricultural sewage processing •Other waste water treatment plant •General water tanks